Art Of Rigging The 1:144 Scale VASA/ Rex Stewart

Here we are ...the second and final phase of this build -VASA's rigging.

In this segment the standing rigging, along with the tackle systems will be covered. For this, it is important to zone in on what's written concerning this process and/or area of build...I must have said this a thousand times over the years for builders (novice and professional) to not rush their projects for acceptance, but to evaluate (and re-evaluate) their research to make sure ALL the i's are dotted and all the t's are crossed. Especially in the rigging phase.

I have read several contemporary blogs regarding both plastic and wooden kits relative to the impossibility of rigging miniature models with the same amount of detail as their larger counterparts. That incorporating miniature detail to these smaller models (both in hull and rigging) would distort the scale -and that the quality would be compromised to those kits that were readily prefabricated. Not true, because the beautiful word 'modification' bring into existence, by way of research, the probability of achieving the best in any kit.

The first criteria to good rigging is good planning...

Here, I just finished a partial rigging table for VASA.

Rigging tables can be beneficial for both present and future use, especially when possible clients request a second or third build from the original. Every artist/builder has their own style and/or method that makes a work a 'signature'. A work of art that is easily identifiable by a discerning buyer and/or collector...Finally, since builders have their own interpretations, it is best that such information be safeguarded.

For years I have researched and re-worked rigging tables based on the studies of others and have discovered more details that have enriched my line of work.

After finishing rigging tables, sails are bent to how I want them featured. For this particular model I want to make the sails appear wind-blown. This will take a lot of engineering to make paper appear cloth-like. Also, to have the lines appear realistic in their fall/belay locations. Here, in the backdrop of the sails, I show a rough pre-sketch used to support the actual configuration(s).

Notice that all blocks and lines are added to both sail and yard(s). This procedure make it easier for the rigging process to move smoothly. One sail can take a day to produce and rig... Sometimes two to three days as shown in the photo images below which depict the main course sail.

Main Course Sail...front view.

Main Course Sail...rear view


Blocks and tackles...tackles and blocks -one of the areas of build I found to be most challenging (to the testing of patience)...In the image below, the miniature blocks and tackles illustrate how awesome a model can become. To make this happen I utilize my personal tools dubbed the "rigging chopsticks". These were made to perform a jeweler's style art to the rigging as shown in the two photos below:

Applying the blocks and silk lines using "rigging chopsticks".

In the above images, progressive results can be seen with the use of these sticks...and the detail becomes  'front and center' for quality. This instrument is not only capable for securing rigging lines (in perfection), but can also assist with the gentle curvature of lines in areas where it seem impossible to reach.

Billowing effects show the gentle curves on the spritsail edges and sheet lines. Also in the lower photo image, details are shown in a deck closeup of belayed lines and coiling-a result from using the "chopsticks".

Here, another angle showing sheet and tack lines hanging loosely to simulate realism.

Starboard bow showing the attached bowlines on the forecourse -along with the tacks and sheets. Once these lines are established, it is here where patience run its course... Again, the "chopsticks" come into play because none of the lines can be attached with tweezers without fouling existing lines. The long metal point of the sticks are thin enough to get lines through the small areas and be effective enough to secure them to their respective pins. Tweezers only serve to assist those lines.

With the sprit(s) and forecourse sails established (as shown), I now work my way to the flags.

In my most humble opinion, flags can make or break the appearance of a good model. Depending on how a model is presented, it is best to have the flags in unison with the sails. If sails are full and limp, then flags should follow the same pattern. If sails are in a slight or full breeze, then flags should be the same...And finally, when wind push sails back against mast(s), flags should be angled sideways (port or starboard) and/or flying backward. Wind pushing sails forward the mast, sails should be forward or angled sideways in forward position. Former servicemen brought this to my attention when I built commissioned kits during my youth.

This image show the paper flags provided by the Airfix manufacturer. These are not properly scaled for the model; so to correct this, I cut a smaller version and changed the paper thickness -applying the references from Bjorn Landstrom's book concerning his graphics and colorscheme.

Here, the new flags and pennant are fashioned as windswept pieces. By placing these flags on the masts (prior to finishing the remaining sails), gives a visual blueprint on how those sails will be bent based on the formation of the flags.

With the foremast sail and rigging systems in place, I now move on to the mainmast -using photo references to get the proper folds and bends of my sails before applying. This can be a long drawn out process since the sails are paper that can be easily torn or punctured. However, with years of practice, I've been able to achieve realistic settings concerning them.

In my prime as a builder, I studied Asian artists and adopted some of their techniques in my work to get a step higher with miniature projects -especially in the genre of sailing ships. I realized that silk had properties that would later fit into my rigging concepts -and that chopsticks and sandpaper would serve to bring about the very detail I was expecting in ship modeling.

Viewing the images below, the point is proven as I address VASA's mainmast.

In the four above images the main course and topsails are installed...shaped to display a billowing effect in those sails. The last image show the lines secured to the knights and pinrails on deck. These are also secured in the tops to fulfill the assignment of a complete rig.

At best, the latter half of the rigging process is the most difficult because the lines are much tighter together. This is one of the reasons the rigging chopsticks is an invaluable and exceptional tool. I can get immense detailing with it...So now I continue with 'the finish' of the main mast and move on to the mizzen -beginning with the lateen sail shown in the image below.

 This now finalize the last phase of the rigging.

The next blog will feature limited photos on the completed model based on the late Bjorn Landstrom's book "The Royal Warship VASA".  The build has been interesting, to date, because the book brought in depth study of how the ship was built. That, coupled with my research on her rigging made this a unique project of note. So now I close being satisfied that I can encourage other builders (whether hobbyist or professional) to study their kits and make the best of them.

I an not in the business to 'compete'...Never have, never will. My purpose in the maritime is to give insight into the world of shipmodels and take place it on a subtle plateau of visibility so that others can be encouraged to take it to another level of excellence by their choosing.

As for those who have kits that wish to be finished for enjoyment and/or display, I can oblige this. Kindly email me at Caseships@yahoo.com or visit my Linkedin page and supporting youtube page at https://www.linkedin.com/in/rexstewart/ and https://youtube.com/c/RexStewartoriginals . I can also be reached at 1-774-757-7137 for details.

I now leave you, the viewer, with these thoughts and look forward to your next visit on this subject of the Swedish frigate VASA. Fair winds!

Sailing Ship VASA c.1628 -Modified/ Rex Stewart...Part Three

In this third of a five part series, my focus is on the rear deck and bulkhead detail(s) - followed by the stepping of the masts.

 Because the kit was warped (and there were testimonies from other builders), it was necessary to clamp the hull halves during the early stages of construction so that I could assess how much space was needed to fit decks and bulkheads without causing too much stress on the plastic.

In the above photo the helmsman bulkhead is shown in plastic which will be partially customized
in wood. Much of the decorations will be copied from the Landstrom book. The delicate part of this build will be to shave paper-thin wood doors and have them appear open.

A view of the stern deck bulkhead cabins on the actual ship at the Vasa Museum in Stockholm, Sweden. One flaw that I own up to is my placing the main knighthead portside. In the photo it is clear that it was located starboard. There is no argument here; I concede.

Concerning detail, I transferred what was visible in this photo to my VASA miniature.

This overview of the VASA show the correct deck layout of the ship's furniture (in scale) which include the pinrails and knightheads. The gratings had to be reduced and scaled properly to fit the guns -giving enough room to show the gun carriage run in system when in action.

The wood decking is the highlight which add overall realism...especially with the accent of the coiled ropes which will show freefall from the sails and masts.

Now that decks are finished, I carefully inspect the decoration, gunport and lanyard channels for paint spotting -making sure everything is completely covered. All details must be finished before moving on to the anchors. Usually the build take two days to complete due to the model's miniature scale...but well worth the effort (based on past projects and/or commissions).

The below photo images show the fashion of anchors during the early 17th century on Dutch ships of the period. Since VASA was designed by a Dutch builder, the practice applies to the vessel. I studied contemporary models both here in the States and Europe and was slightly disappointed with my findings which prompted me to return back to Bjorn Landstrom's book for the finer details.

From his book, coupled with my personal research of the Dutch and English Masters (artists), I found his work to be very credible and applied the rigging system accordingly. On either side of the model, the rigging system of these anchors differ. Portside show them stowed and starboard has them fished.

Stowed anchors...portside.

Fished anchors...starboard


Now with anchors completed, the next step of the build are the miniature cannons and boats, followed by the stern lantern and flagstaff.

Armament can be complexed when customizing small scratch-built cannons. Much planning and thought must be weighed -especially when scale is involved. Kits are not designed to be perfect. In fact, kits only present a basic generic of detail -and much of it is not guaranteed to be scaled properly. It's a matter of choice as to the level of detail pursued, but it will cost many hours of research and patience. There are no shortcuts. In the supporting images I begin working on the cannons  -building  them (to scale) accordingly to the ship's deck furniture.

Below are images that reflect the level of  'miniature' I desire to achieve.

As viewed, these cannon miniatures are no longer than two-thirds the width of an American dime (as shown above). The materials used are bass and birchwoods, paper, copper wire and vintage carpet thread for the recoils.

 In this image the cannons are installed. To compliment them, I secure  the shot trays between the guns. In them I simulated cannon balls which can be seen with a magnifier...Below a closeup view of the shot tray.

On many VASA models I noticed the capstan not properly clearing the stowed boats. But what really caught my attention was the absence of the belfry. All ships, especially naval, carried this forward at the bow area of the forecastle.Without this (the belfry) ships would not be functional, especially in battle.

My draft and build of VASA's belfry -using birch for the bell and basswood for the overall structure. A fine sable brush was used to achieve the hairline gold-edged corners and scroll work on the roof facade.

After carefully investigating VASA's forecastle layout, I concluded that the belfry was located between the barrister rail and foremast which void all fouling of cannon tackles and sail rigging as shown in the supporting images.

Stern detail of VASA's deck furniture and cannon. No kit involvement here; all details were scratchbuilt in wood. The next and final approach to finishing the hull will be the inboard boats and ship lantern.

In this three-stage process I use Mr. Landstrom's book to scale (in miniature) the VASA's stern lantern.  Measuring both top and base features, I move the template down to the transom for scaling. From there, I am able to make a template (red half-circle) to assist in the building of an accurate miniature for the model.

The three supporting images show the finished lantern...At least 46 pieces combined in wood, paper, acetate, and metal make up its design. Not only can one see through the simulated glass; but looking closely,  wings can be seen framing the windows from the sculpted uprights.

Fast forwarding, I now address the ship's boat -the longboat that was discovered next to VASA when she was raised in 1961. From Mr. Landstrom's writings it was defined as a sloop that carried leeboards port and starboard. On many models (small or large), I have not seen this item featured; so after many hours of study, I decided to add them to further authenticate the miniature.

The supporting images show the start and finish of the build:

The VASA longboat (sloop) shown as it appear at the museum.

Above, these three images show the build's progress, the rigging of the leeboards, and the final installation of the sloop. Overall, it took approximately three days to build...using pine, bass and birch woods.

Now that this segment has been achieved I will move on to the masts and rigging in the hopes that it will encourage many of you to take on the Airfix Classic Series kit of Wasa c. 1628.

I never snubbed my nose at the fact that the kit was plastic. I studied details and researched products to modify it into being a museum piece. Taking nothing away from it's properties, rather adding to it to prove how exquisite a regular kit such as this can become...with patience.

I appreciate the follow and hope to read your accounts relative to this.

Fair winds!

Sailing Ship VASA c.1628 -Modified /Rex Stewart

Here, we have the complete modified beakhead and stem of the Royal Warship VASA -based on Bjorn Landstrom's research and illustrations at the time the ship was raised from Stockholm's harbor in 1961. The book, itself, was published in 1988...being an invaluable asset to my build in spite of the criticism from various contemporaries.

In this second part series I focus on the beakhead and deck applications... Again,  museum quality model(s) can be achieved from the Airfix kit; but it takes an enormous amount of patience and concentration to bring the build to this level seen in the blog. Furthermore, it takes effective engineering and proper knowledge of Dutch rigging to make this a worthy endeavor.

There are no shortcuts...

The grated flooring of the Airfix kit was rather basic with limited detail. There were no openings for the gammoning or tack leads. So to compensate, I traced the kit version unto basswood -cutting out the outer frame and gluing small miniature slats across to serve as gratings. It was tedious and time-consuming; yet very gratifying after two attempts.

The grated flooring finished and installed...

After the beak's flooring was painted, I went to work on the forecastle bulkhead -modifying the entranceways and replacing the plastic doors with wooden ones (as seen below). But before that was accomplished I scaled down the Swedish Coat of Arms that was featured on main deck rail system (as seen above). This small detail would be the highlight of the bow.

In this image the viewer is shown modified doors, hull stem for sprit mast, and companionway steps.

All information provided by historians is based on the limitation of information. Meaning, we work at what level of truth is evident for the period researched. There are no absolutes, only findings that are probable and concise...And yes, mistakes can be made with research; and a real historian will puth the facts put there and not allow politics to corrupt and/or pollute it. I follow blueprints (and even produce my own) which stem from the blueprints established by others.

Bjorn Landstrom book is a landmark study of the VASA; yet, in some areas he flawed. However, in most areas he shined and that's where many miss the mark.

The next three images will show the completed beakhead and the frontal piece of the forecastle...with some additional details such as the small ladders leading down to the grated flooring from the port and starboard doors.

Closeup detail of VASA figurehead in goldleaf...

Port beakhead overview...

Bow starboard frontal view...

The next step of the build/modification are the decks. These must be carefully planned in both layout and fitting. Also the right scale for the grating, knight, bitt and bulkhead locations are very important for the overall appearance. Furthermore, the rigging has to be considered relative to spacing on the deck and pinrails. There must also be room for cannon to be run in and out by the tackles, so the grating must be scaled to compensate this.

The below image show the new reconstructed deck in comparison to the kit's feature.

Proceeding further into the build, I arrived at this stage of the deck layout

Subtle starboard view of deck looking forward...Notice the 'sweep' as was typical of the Baltic State ships of the period.

As I build my eyes are continuously searching the model from stem to stern. I try not to remain in one area too long, as this will cause neglect and missed detail to other locations. Sometimes my best corrections are when I apply this process.

Working with guns command ongoing attention because it is the main feature to any fighting ship. I could never understand a model with all cannon run out on either or both sides. It doesn't seem realistic -or authentic. In this build I place the gunports in various stages, re: closed, partially closed, partially open, completely open...Along with the flags and sails, this is another one of my signatures that distinguish me from my contemporaries. Below, a waterline image that show the varied gun stages on VASA.

Below, a profile view of the opened gunport variations...Notice on the ports and hull how realistic these features appear (under diffused lighting).

Sixteenth and seventeenth century ships has to be some of the most beautiful  vessels to model...and I've done both. However, my line of work is extensive which cover ships and vessels of all periods. But these two centuries are special because it allow me to go all out with my carving and sculpting skills...Furthermore, I can appreciate the intricate workmanship of those artists and shipwrights who illustrated, designed and carried forth the artistic mastery of that time upon their vessels.

That being said, I now present the last two images of VASA's stern galleries to close out 'part two' of the series.

There is more to address within the ship's interior before stepping the masts. I can only hope the seasoned builders will make good on their 'stash' as they call it and not let those kits sit idle. And of the collector(s), I encourage you to acquire these as they are valuable when modified. The detail is 'there'; it's a matter of choice to how much correction in the detail is preferred...because beauty is in the eye of the beholder.

These last two views show the completed stern galleries of VASA...It is believed that her topsides were red, but there were no evidence of that based upon Bjorn's writings on the subject. What little evidence he wrote about claimed that there were traces of blue pigmentation and gilding. Of colors, some pigmentation were found inboard around the bulkhead doors and interior walls of the cabins. Climatic conditions, sealife and water corrosion took its toll on the vessel...so much of the color had to be derived from master painters of the period. And even in that, not one painting in any museum show red topsides.

With that in mind, I now close this segment of the build and raise my glass (honorably) to Bjorn Landstrom's legacy. This will be a fine study and a most memorable model when finished.

To view my credentials and other fine work(s) please visit https://www.linkedin.com/in/rexstewart and https://youtube.com/c/RexStewartoriginals.

For information concerning commissioned work call 1-774-757-7137 or write for details at: Caseships@yahoo.com.

Thank you for viewing!