Airfix 1:180 Scale PRINCE...The Art Of Modification/Rex Stewart -Part Four

This is a more advanced image of the PRINCE current stage, but it has enough finished detail to now focus on the upper batteries and channel deadeyes.

I realize that this will probably be a seven to eight part blog. However, it's worth writing, especially when serious builders want to further their skills relative to historical detail(s) as opposed to the generic -or common practice.

I can't say it enough about 'admiralty models'..Again, they were not accurate in the sense of scale, but rather beautiful art pieces that were visual prototypes for building the actual ship. Builders get caught up in thinking that these prototypes were, in essence, the 'bible' to naval architecture. They weren't; and to believe that is a misnomer. I was fortunate to learn this (the hard way) years ago when a serious collector 'collectively' corrected me on certain details that I copied from a admiralty model. He waived the advances (out of respect for my work) and had me repeat the build with written data from writings of that period. That model became the cornerstone for all my models -including steamboats.

The images I'm about to place here will stem from actual documentation -and not speculation or theory. This is what makes a model unique and beautiful.

In my last blog I showed how I customized cannon to fit properly in the ports. Here, I show them from various deck angles which give a realistic feel of duplicating the actual ship...This is due, in part, because of proper scaling. Below are four images to support this:

A port broadside overview showing the complete gun batteries in both coil and recoil positions on both the main and quarter decks.

Portside stern overview showing another inboard/outboard perspective of the cannon and grates. On the original model the grating was too close to the mizzen mast and was relocated further ahead to the  quarter deck fore rail area. It was scaled wide enough to make room for the carriage tackles running in and out the cannon.

Starboard profile of main deck artillery...

 

Port overview showing the forecastle belfry, companionways and inboard/outboard cannon and tackles. Instead of keeping the full capstan, I removed the upper portion and replaced with a hole-drilled dowel and made wood capstan bars which are shown belayed on deck.

Port stern view showing partial full main and quarter deck cannons. This was the final deck installation before moving on to the channel details. On the admiralty model the belay pins were atop the rails. Unfortunately, because the Airfix version was off scale in this area, I had to compensate by placing the pinrails inside the bulwarks.

Over a hundred or so models I researched on Prince, I noticed details missing that encouraged me to place more emphasis on this. With the channels I noticed eyebolts missing which took the relieving tackles; but this was also evident in the tops. On the main channel the lower studding sail boom and cradle wasn't featured (on any of the models); nor knees attached to both channel and hull to strengthen it (channel) for taking on the heavy boom and relieving tackles. Below, I show this detail in a Willem van de Velde II study of the English ship  VICTORY which was built in 1620...She is shown as she appeared in 1666.

There is another possibility at play here; the fact that this was, and could be, a spar lashed alongside in the event that a topmast was lost at sea due to inclement weather or sea battle. There is another spar at the quarter deck tier which is lashed as well. However, in the Kennington lists of the 1650s, studding booms were mentioned for the main mast and must be presumed to fit on the main channel.

For a model builder, it's a judgement call. For me, I chose to feature this detail as an additive to European maritime practice as shown in the photo image below.

Another portside overview showing the studding boom and cradle on the left at the deadeyes and  channel...

Research is what you make it; it can be intense or it can be mediocre...but at the end of the day you own it. This is why I try to make the best of my materials and look further into documents to find whether things are 'political' or whether absolute. In my journey I've danced with both and I found this great peace of knowing truth -which is why these pieces are at the level that they are.

Now that I've clarified the studding booms, my next process of the build are the masts.

To join plastic to wood is a tricky endeavor. The right glue is needed and a ton of patience. Since I will be using the plastic tops, caps, and crosstrees; it's essential that I carve the wood masts a millimeter smaller than the actual (plastic) masts so that these can be fitted properly in the routed cavities where the plastic was. To keep the wood in those cavities I carefully drill holes in both plastic and wood pieces -gluing a metal pin in the wood and then sliding the open air part of the pin into the plastic. Being careful not to have glue touch the exposed areas since these have to be stained, varnished and painted.

Below, I shave away excess wood to form the mast...

Notice the partially finished mast above my carving hand; and notice the completed mast below. To actually view it, one would be convinced that it was totally wood.

The next step of the build is to study all the belay systems before stepping the masts. This is very important, because once the masts are secured, there's no possibility of having all the lines rigged. This can take several weeks...sometimes a few months; and serious builders/collectors know this.

Below are several views showing the masts, and how they will appear on the model before the rigging is started.

 

This concludes the fourth part of the HMS Prince build. I truly hope that what I've stated can be beneficial to those who currently own the Airfix kit. Understand that no kit is a hundred percent intact by way of fitting together parts. Every kit has its pitfall, no matter how detailed.

What will guarantee a nice model will be the patience in building it. There will be moments of anxiety and frustration; but that comes with the territory of discovering new information and/or techniques. Quality depends on how much time one is willing to put in a project...but, NEVER get consumed. That will only drain your focus. The 'first' PRINCE drained my focus, as the model was attractive; but, common mistakes were made. However, I corrected those flaws and am satisfied with this current work. 

That being said, I close this portion to make way for the next.

Fairwinds!

Swedish Warship VASA -The Finale/ Rex Stewart

The finished Vasa model -shown with full sails in the appearance of what the ship would have looked like had it not sunk. After seven months in this build, I finally was able to get all the minute details.

As with all my work, past and present, there is a sense of accomplishment that's difficult to explain. If so, it would have to be in book form...if that's possible. I don't know. But what I do know is history is a wealth of information accessible to anyone who dares to explore it.  There are no limitations to it, just the fact that it's there for the taking.

When a subject comes to the general public, and it's marketable; that subject takes on a life of its own. From it are many variations and in most cases that subject is scrutinized. However, the point is to enjoy the work, not debate it. With that approach, true satisfaction is achieved and more works can (by choice) be realized.

This Vasa model is just one of 'many' models I've engaged over the years. No different from any, but a collection of all in various mediums and classes. This is one of my specialties as a historian-artist.

My experiences from times past is the anchor for my successful journey 'today' in the maritime arts... which also include ship models. And this Christian testimony is given to God's glory and not man's. However, from a social stance, I have been fortunate to connect with those of maritime excellence -obtaining information that would push His work(s) to a greater level of visibility.

And yes, we will have mockers in this business; but the fact remain that NO GOOD WORK will be hidden. That's an absolute that men have tried to challenge...and failed.

Here, I sit on the deck of the Dutch VOC replica HALF MOON looking over the original plans of the contemporary ship that Nicholas Benton and I designed in the summer of 1987. My involvement was the design of the topsides based on his trip to the Netherlands to acquire the data.

Below, the Royal Family sit before my accurate model of the contemporary ship which was celebrated at the Waldorf Astoria in New York City that fall of 1989.

After that celebration,  22 years later I was again commissioned to build another HALFMOON model at a larger scale to parallel New York's Hudson-Fulton Celebration 400...And because no one had the original plans (but I and Benton), the model had to be in exact detail to the actual ship.

Below, a large scale diorama I created depicting the Lenape natives advancing toward Half Moon that September of 1609 (at the mouth of the Hudson River)...The diorama commemorated the Hudson-Fulton Celebration as part of a downstate Ellis Island Exhibiiont which was commissioned by its curator, Dr. David Ostreicher.

Here, during the Hudson-Fulton 400 Celebration, Dr. David Ostreicher lectures about the Hudson River, the ship Half Moon (Diorama), and the Lenape Tribe in New York City that fall of 2009.

After the diorama project, I went on to explore the possibilities of building additional Half Moon  miniatures -along with other ships...such as Prince, Endeavor, Batavia, HMS Revenge, and others. Those sailing ships were interesting builds which motivated me to explore the possibility of enhancing existing kits through modification. And  with that came this current build which is now featured in this blog and added to the roster of detailed models.

There's very little I can say that hasn't already been said of this vessel and its history. So many  models exist that the beauty and design clearly denotes Vasa's identity. Therefore, the remaining closure to this blog will be the images of  'the finish'.

I raise my glass to the Swedish people for bringing the actual ship to the surface and providing professionals like myself the opportunity to study the history from a creative perspective. Furthermore, I'm indebted to the Dutch culture in The Netherlands for their input and support relative to providing me data forwhich my models have been based...That, alone, is priceless.

Now, I present these eight images of the finish...

As aforementioned, my sails are custom made of treated bond paper. These are antiqued over a five to ten year period so that I achieve beautiful folds while shaping them. There are no visible (if any) punctures in the material; and the rigging that's applied set these off nicely.

Below are two profile views showing the gracefulness of Vasa sails and how artfully they fall insync with her superstructure...One of the reasons it's one of the most sought-after subjects in modelling. Also, the symmetrical rigging (whether loose or tight) -draws the viewer to examine its properties.  For me as a youth, this was a fascination to view these lines at my local Boy's Club.

I would go directly to the clipper ship model at the entrance -being intrigued by it's rigging. There were no sails, just those awesome lines running through blocks and being belayed to the decks and tops. That, alone, sparked my interest to pursue the art.

The next two views show the lines and their complete belay falls which was one of the challenges I embraced for the purpose to have other builders engage modification. Anything can be upgraded to excellence, as shown in these images.

These last five images are profiles of a fine model in the Airfix Classic Series on WASA c.1628.
This was one of the best kits when it was introduced in the 1960s -along with the forerunner ROYAL SOVEREIGN, which was followed by the SAINT LOUIS c.1626.

This concludes the Vasa build; and I'm delighted you enjoyed the entire presentation. Of course there will be other Airfix models I will (overtime) modify.

As for those who have kits that wish to be finished for enjoyment and/or display, I can honor your request. Kindly email me at Caseships@yahoo.com or PM (private message) me at my Linkedin page https://www.linkedin.com/in/rexstewart. Other work(s) can be viewed at https://youtube.com/c/RexStewartoriginals

Thank you for viewing!